These were created by using the letters from the 'Gill Sans' and 'Helvetica' alphabets as reference, I created a word or phrase related to my future (in this case, photography). I had to copy/trace the fonts and change the scale or positioning of them to create something more original. I like the way that over-lapping the letters has worked in the left one, and in the right I like that use of thick and thin pen to differentiate the words.
Saturday, 28 September 2013
GRAPHICS: DAY 2 - Alphabet
This is the first full alphabet I created. I stuck lots of random bits of masking tape over my page in various places. Then, I wrote the letters in simple, capital letters. Afterwards, I peeled off the masking tape, leaving some of the pen remaining on the paper, but taking some of it off with the masking tape. I found this interesting because although some of the letters are missing, our brains automatically fill the gaps, as we know what the letters should look like.
Here I tried out two more alphabets in different forms of typography. Firstly I filled out the full alphabet from one of my experiments, the mixture of upper and lower case letters, I think this came out quite well, but in some of them the lower case couldn't really be seen, such as 'I', 'L' and 'U'. The final alphabet I chose was to base it on the idea of circles. I drew circles on the page and then based my letter around each of the circles. I quite liked the way that some of the letters/numbers curved at the ends.
GRAPHICS - DAY 2: Letters
We were asked to 'make marks' on the paper that could create letters in any way we wanted. We were told to be as experimental with our work as possible, which I found hard to think of ideas for this. I think that I was maybe thinking too much about the task rather than just doing it.
This was created by cutting out the shape of a letter, in this case 'M', out of the paper, and then folding the paper to create a background. I then colouring in the background with lots of colours to make the 'M' shape stand out. I felt that it showed the letter well, but I felt that it was too obvious and not creative enough.
For this, I just used my pencil to swipe across the page to create random lines and then looked for a letter created by them. I found the letter 'A' in this, and I think that this was a better, more spontaneous way of creating a letter.
For this I tried to create a shadow with my hand so that I could draw around it. However, I found that the light was so bright that I couldn't actually get a strong enough shadow, so the letter 'E' was all could make.
For this drawing, I drew a lot of fast, spontaneous scribbles on the page, which initially is only saw the letter 'E', but now, looking back, I can see the letters 'S' and 'H'.
Here, I took a technique from a previous pathway. I used the idea of putting some dots on a page and creating and image/letter out of that. Here, I found the letter 'P' in a sharp, pointy type, however, I think that this isn't as interesting as some of the letters I have found.
This was made by using a scalpel to scratch into the paper in the shape of a letter. I then coloured over the top of this to enhance the different textures, to reveal the letter better. However, I felt that this was a bit to obvious, as I was just simply creating a letter by basically drawing it.
I then drew various circles on the page to create overlapping circles, almost like a 'Venn' diagram. From here I managed to find the letter 'E' which could also be an 'M'. I found it interesting that I could first two letters from the same formation of circles.
For this, I chose to use a combination of lower and upper case letters, to create a new version of this letter. I really liked the simplicity of this to create a more interesting type face. I also feel that this minimalist style works well.
Here I screwed up a piece of paper and drew around it. I found it interesting the way that the crumpled paper formed the letter 'C'. I felt that the way that the letter has a pulled back part, which looks like movement or speed.
I then unscrewed the piece of paper used above to see if I could find letters on there. At a first glance I could see the letters 'Y' and 'H', but now looking closer, I can see even more.
GRAPHICS: DAY 1
We started our graphics week by doing some alternative drawings of peoples faces. The first image, shown above, was created with me drawing with my eyes shut. I found this particularly difficult as I kept wanting to open my eyes. I don't really like the outcome of this as I felt I was unable to shape the facial features as I hoped to.
This second drawing was drawn with the pen in my mouth. I found it difficult to make a mark on the page with the pen, but when I did it created a very interesting wobbly line as I was unable to control the pen as I would with my hand. I felt that the outcome of this was very interesting and is something that I would like to try again, as it has a very different style to it.
For this piece, I had to draw with my non-writing hand (my right hand). This type of task I always find hard and end up with strange outcomes, but I found that if I made small, short lines I could control the pen more and create a more visible image with some detail.
For this final task of drawing faces, I had to draw myself using continuous line drawing. I found this hard as I kept wanting to take my pen off the page. However, by using thicker and thinner lines I was able to define the features from the lines that were joining them up.
We were the asked to draw someones ear, on an A1 piece of paper, filling the page. I used charcoal for this, allowing me to be more daring in my actions and also led me to adding shadow and working quicker than I would with pencil.
We were then taken to Level 4 and placed all our ears next to each other, which firstly allowed us to see how other people approached the same task. Then we could go to the level above and look down on our work, allowing me to see my work from a different perspective. It was good to step away from my work and to see what it looked like from further away, after looking at it close up for so long.
We were asked to create a collage of a face out of existing faces of famous people from magazines. I chose to cut out lots of the same feature to layer them on top of each other to create a strange look with lots of eyes, noses, mouths etc. I felt the outcome was very interesting although, looking back, I found that the face was to wide.
The photo above shows the section that I chose to select with my view finder, and this is the section I have decided to draw. I chose this because there are lots of the same features in this part of the collage, showing the way that I chose to layer it.
This is my drawn picture of the image from the view finder. I chose to use biro for this as I thought it would be interesting to see the outcome of a media that I am not very used to using. It took me some time getting used to the best way to use the biro for shading but I feel I got there in the end. I used a combination of blue and black biro to enhance the eyes in this and make them stand out from the rest of the image. There could be some improvement in the way I show the tone of the plainer, 'skin colour' areas, as they were hard to show what tone they were.
Friday, 27 September 2013
GRAPHICS RESEARCH: KEMISTRY GALLERY
I visited the Kemistry Gallery as part of my research for the graphics rotation. The 'Seymour and Milton Show' was on display there, which had lots of varying types of graphic design there. This gave me an insight to how I could interpret the graphics rotation. The gallery was a lot smaller than I expected it to be, with all the pieces in one room. I found it really interesting o see the diverse range or works around the gallery, ranging from illustration to photography. There was a small table in the middle of the room which displayed various sketchbook work; showing how their ideas developed from the initial sketches to the final posters. I found it really interesting how much changed throughout the development stage.
The two images below were particular pieces that stood out to me in the gallery. In 'The Secret of Art', I liked the simplicity of it, and using the screwed up paper in the middle as the focal point. I feel that the use of photography in this is very fitting to the piece. In 'Art is... WHATEVER', I like the use of shadow which, I feel, defines the piece. I also think that the way the shadows' hat is covering is covering the word 'HAT' in 'WHATEVER' is a very clever play on words.
SHOREDITCH ART.
I went to the Kemistry gallery to look at an exhibition related to the Graphics rotation. On the way there I passed some places on my way there that I found interesting, and I thought I would take a few photos to document them:
GRAPHICS ROTATION: RESEARCH
MARIAN BANTJES.
Marian Bantjes is a Canadian graphic artist. Her work uses a lot of typography. Whilst researching her work I found her book, 'Pretty Pictures' which looked really interesting with all of her work in it. There was a variety of different works in there. I like this piece as at a first glance it just looked like swirls of wire, but you look closer and you can see it is made up of words and heart shapes. The words here also are romantic, which really works as the shape is a heart and the colour is red; which both depict a romantic feel.
MILTON GLASER.
Milton Glaser is one of the most famous graphics designers in the USA. One of the most famous and significant pieces of work Milton Glaser has designed is the 'I love NY' logo, which is so simple yet so effective. It is so popular and known worldwide, which makes it such an iconic piece of design.
STEFAN SAGMEISTER.
Stefan Sagmeister is a graphic design who has one work for Rolling Stones, Lou Reed (see left) and The Guggenhiem. He has a partnership with Jessica Walsh (Sagmeister&Walsh) and together they do a variety of projects including Branding, Advertising, Packaging, Web Design, and more.
Marian Bantjes is a Canadian graphic artist. Her work uses a lot of typography. Whilst researching her work I found her book, 'Pretty Pictures' which looked really interesting with all of her work in it. There was a variety of different works in there. I like this piece as at a first glance it just looked like swirls of wire, but you look closer and you can see it is made up of words and heart shapes. The words here also are romantic, which really works as the shape is a heart and the colour is red; which both depict a romantic feel.
MILTON GLASER.
Milton Glaser is one of the most famous graphics designers in the USA. One of the most famous and significant pieces of work Milton Glaser has designed is the 'I love NY' logo, which is so simple yet so effective. It is so popular and known worldwide, which makes it such an iconic piece of design.
STEFAN SAGMEISTER.
Stefan Sagmeister is a graphic design who has one work for Rolling Stones, Lou Reed (see left) and The Guggenhiem. He has a partnership with Jessica Walsh (Sagmeister&Walsh) and together they do a variety of projects including Branding, Advertising, Packaging, Web Design, and more.
Sunday, 22 September 2013
3D ROTATION: REFLECTION
Before starting the 3D rotation, I had preconceived ideas of the subject, and initially I was not really looking forward to this rotation, due to my A Level product design course. However, I pushed all these expectations aside and tried to start a fresh for the new course. I found the tasks different to what I was used to; having to create items within a short time frame, whilst trying to make them visually interesting and work in the way they were meant to.
The first thing we were asked to make was a water bottle out holder out of paper, and although mine looked visually interesting, it didn’t actually provide the function it was meant to. This made me more determined to make later projects work. We were then asked to create something to hold a person off the ground, in what ever way we could. This was successful and visually interesting.
On the 2nd day we undertook a teamwork project, creating a bridge out of bamboo sticks and cardboard.This was quite a difficult and stressful task, and I found it quite hard. I felt that I wasn’t very aware of ways of making things work in a three-dimensional way, so found it hard to have input. I felt a little lost and left out within this task.
On the 3rd day we created objects out of spaghetti sticks to hold plastic balls off the table. I enjoyed doing this and felt that the outcome was successful.
I have learnt that these projects weren’t necessarily about making the 3D projects work, but more about trying to be more creative with what we made. I felt that this helped me change my outlook, not only on the 3D rotation, but will also help me in future rotations.
I was happy that I was able to use my ideas to combine the function and the physical appearance of an item to make work and look good at the same time. I found it hard to do this, but eventually it got easier, by using trial and error to figure out what worked and what didn’t.
If I could change or improve anything, it would be to be even more creative with my work, even if it didn’t work. I felt that I worried too much about whether it would work or not, which limited my creativity. I have a more open, positive attitude toward the 3D pathway than I did previously, which I think will help me with my work in whatever pathway I choose to pick.
3D: SPAGHETTI STRUCTURES.
This was our final project from the 3D week. We were asked to use sticks of spaghetti to create some form of structure to hold 3 plastic balls off the ground. We were only allowed to use 20 sticks of spaghetti. Below is the first part of my structure, I build 3 sections that would be able to hold a ball each individually.
Then i used the glue gun to glue the three parts together, ensuring that I could still fit the balls on the structure. I had to add a few extra bits of spaghetti at this point to support the balls better.
After I had finished gluing the structure, I sat some small men on it, as an example of size. This made it look more like a large piece of architecture rather than a small model.
I then had fun playing with the lighting and shadows when photographing it. I photographed it with and without the balls for variety and to see the difference in the shadows. The photos with the balls showed more of a contrast between straight lines and curves which gave a very interesting shadow.
The photo below shows our entire class' structures. It was interesting to see how everyone could make such a different variety of objects with the same materials and specification.
After this we were told to 'pack out' our objects to prevent them from being broken if something where to be dropped on them. I found this rather hard to as I couldn't seem to pack out the underside of my structure.
Saturday, 21 September 2013
3D: SPAGHETTI STRUCTURE DESIGNS
Subscribe to:
Posts (Atom)
About Me
- Sophie Landick
- Hi, I'm Sophie. I'm 19 years old and I'm an art student, currently studying a Foundation in design and media at Ravensbourne College in London. I have currently specialised in graphic design.














































